Not a single smartphone is immune from breakdowns and various failures, including those as reliable as the iPhone. Sometimes users are faced with a situation where the device does not turn on and does not respond to buttons.
What to do in this case?
It all depends on where the problem is. If you run into it after the smartphone has been dropped or water has entered the case, this can only be fixed by Apple Mobile Repair Online Delhi.
It is better to contact the service center immediately. If the problem is not related to damage to the device, you can try to solve it yourself. We will consider how to turn on the iPhone if it does not turn on in detail below:
The smartphone is dead
Most often, the phone does not turn on is trivial – the battery is discharged. As a rule, users are faced with such a situation when they leave a released smartphone for the night on charging, and in the morning, they find that it does not respond to pressing buttons.
The reason is that the charge was not received. As a result, overnight, the smartphone was discharged and turned off. The problem might be as follows:
- Damaged charger or cable;
- The battery is completely out of order (before this, there are usually symptoms of severe battery wear, such as fast discharge, even when the smartphone is in sleep mode, shut down when the indicator still shows the presence of a charge, etc.);
- Problems with the charging connector.
If you are sure that the problem is not with the battery, try charging your smartphone with a different charger. If this is not available, connect your smartphone to the USB port of your computer, but it is advisable to use a separate cable for this. The charge may not go right away, so leave the smartphone connected to the charger or USB port for about fifteen minutes.
If the smartphone does not respond to the connection of another charger, it is possible that the wreck has got into the connector or the contacts have oxidized. Try cleaning the connector gently to solve the problem. To do this, soak a toothpick or a match pointed at one end in alcohol and gently cleaned the socket. Keep in mind that the toothpick should be damp but not wet. Then try plugging in the charger. If the situation has not changed, repeat the procedure.
Sometimes, the smartphone does not respond to pressing the buttons because it simply hangs up and switches to the “save mode.” A similar situation may arise if the phone has not rebooted for a long time.
To resolve this issue, Mobile Repair Online recommends you force reboot your phone. If you have an iPhone 8 or newer, you need to follow these steps:
- Press and quickly release the volume up and down buttons alternately.
- Press and hold the side power button until the logo appears on the screen, then release it.
If you have an iPhone 7, hold down the power button and the volume down button at the same time until the logo appears. It usually takes 15-20 seconds.
On iPhone 6s and all earlier models, press and hold the Side and Home buttons at the same time until the logo appears.
If none of these solutions helped, we recommend contacting RepairBuy – Best Mobile Repair Online Delhi. With our Doorstep Mobile Repair Service, our technicians will diagnose the device and quickly eliminate the malfunction at your doorstep.